Payment & Shipping Terms:
|Product Name:||IP POE Ceiling Speaker||Model Number:||RH603PE|
|Use:||PA System||Speaker Unit:||Woofer6.5"*1 + Tweeter 1"*1|
|Amplifier Type:||Digital Class D||Frequency Response:||90Hz~20KHz(±3dB)|
|Cutting Hole (mm):||210mm||Rated Power:||30W|
RH-AUDIO IP Active POE Ceiling Speaker With RJ45 Port
The RH603PE is a IP based ceiling speaker is powered by PoE+network switch through CAT5 or CAT6 connection - no external power supply is required.
Built-in Class D amplifier provides effective use of power,the system outputs rated power 8W when use the Power Over Ethernet. An additional inlet is ready to connect separate DC12V(4A) power source,which will make the system output rated power 30W.
The speaker unit in the system is of the coaxial type with an 6.5" woofer of polypropylene,an inverted rubber surround,and a 1" polyamide soft dome tweeter mounted on a post,these two drivers are coupled through a built-in capacitor bypass crossover.
This speaker system has excellent dispersion,wide bandwidth and a smooth frequency response which makes this the top choice for voice paging,playing music,emergency notification alerting and bell scheduling applications.
(1) Supports protocols of TCP/IP,UDP,IGMP.
(2) Static IP Address
(3) Integrated Class D amplifier .
(4) PoE+powered without a need for local power.
(5) RJ45 connection for audio from PoE+Ethernet.
(6) 6.5” polypropylene cone with inverted rubber surround.
(7) 1” Polyamide dome tweeter.
|Amplifier Type||Class D|
|Power Supply||PoE or DC12V(4A)|
|Rated Power||Power Over Ethernet: 8W|
|DC12V Connector||Phoenix connector|
|Communication Protocol||TCP/IP, UDP, IGMP|
|Audio Bit Rate||8K~512Kbps|
|Speaker Driver||6.5” woofer, 1” tweeter|
|Cutting Hole (mm)||Ø210mm|
|Material||ABS enclosure,metal grille|
|Net Weight (kg)||2.4 kg|